BOTONES MILITARES AMERICANOS U.S.A.
2 participantes
- Felix Davila RamirezExperto del Foro
- Cantidad de envíos : 915
Edad : 71
Localización : Sabinas Coahuila
Frase Célebre : Si buscas encuentras
Fecha de inscripción : 06/04/2009
Puntos : 6795
BOTONES MILITARES AMERICANOS U.S.A.
Dom 09 Jun 2013, 5:28 pm
HOLA COMPAÑEROS , MUCHOS DE NOSOTROS ENCONTRAMOS BOTONES MILITARES ALGUNOS DE LAS INCURSIONES DEL EJERCITO DE ESTADOS UNIDOS A NUESTRO PAIS LES DEJO ESTE ARTICULO PARA QUE PUEDAN IDENTIFICARLOS MAS FACIL ......SU COMPA FELIX. US Uniform Buttons
Recommended
US Military Uniform Button Identification
A uniform button's use and age is principally determined by three characteristics, usually considered together. First the "device" (design) identifies the service or state militia that used it, and generally when it was used. Keep in mind that certain devices were used for many decades, so other clues are needed. The buttons construction also offers a guide to age. Finally, the backmark may not only indicate the manufacturer, but if a particular mark or the manufacturer was in existence for a narrow time period, you can further pin down the likely age and use of a button.
Some rules of thumb of age can be made as to how the shank is attached. A one-piece button with a brazed shank (soldered appearance) is a design common in the 18th century, but was also made after. A two-piece button with a brazed shank is typical of 19th century. Two pieces crimped together were first made about 1813. Two-piece hollow rounded buttons held together by a thin rim ("staff" buttons) were invented in the 1830s and used until 1902. Civil War era buttons may show a circular depression at the base around the shank. Shanks inset into holes in the button is typical after World War I. Tinned Iron Back (TIB) and stamped brass turret back buttons are common from the 1880s to 1920s.
Sometimes one of the best indicators of button age is the manufacturers backmarks. Here are examples of the American manufacturer Scovill, and their 19th century backmarks as reported by Albert (1976):
LEVENWORTH, HAYDEN & SCOVILL (also as LH&S) 1811-1827
J.M.L. & W.H. SCOVILL 1827-1840
SCOVILLS : 1827-1840
SCOVILLS & CO. : 1840-1850
SCOVILL MANUFACTURING CO. : 1850-1960
SCOVILL Mg. Co.: 1850-1865
SCOVILL Mg. Co. / WATERBURY CT. 1850-1865
SCOVILL Mf'g Co. : WATERBURY CT. 1850-1865
SCOVILL Mf'g Co. WATERBURY : 1850-1865
SCOVILL Mfg Co. WATERBURY CT. : 1850-1865
Keep in mind that using Scovill backmark lettering (including dots and stars) is not a foolproof method because Scovill often used old backmark dies to make newer buttons. Thus it is possible to have a World War I "Great Seal" button with an 1850 backmark. Another nuance is that while text may remain the same, other embellishments on Scovill buttons change with time. An 1850 backmark may have the name in a groove or one or two rings made of fine lines or tiny dots, whereas a later button may have no ring of dots (like the Great Seal general service button below.
Here are Scovill examples we have observed:
SCOVILL MF'G CO. WATERBURY CT. 1872-1902 (on GI 98, ring of large dots)
SCOVILL MF'G CO. * WATERBURY *: 1902-est. 1918
(on Great Seal coat buttons with ring of large dots)
Recommended
US Military Uniform Button Identification
A uniform button's use and age is principally determined by three characteristics, usually considered together. First the "device" (design) identifies the service or state militia that used it, and generally when it was used. Keep in mind that certain devices were used for many decades, so other clues are needed. The buttons construction also offers a guide to age. Finally, the backmark may not only indicate the manufacturer, but if a particular mark or the manufacturer was in existence for a narrow time period, you can further pin down the likely age and use of a button.
Some rules of thumb of age can be made as to how the shank is attached. A one-piece button with a brazed shank (soldered appearance) is a design common in the 18th century, but was also made after. A two-piece button with a brazed shank is typical of 19th century. Two pieces crimped together were first made about 1813. Two-piece hollow rounded buttons held together by a thin rim ("staff" buttons) were invented in the 1830s and used until 1902. Civil War era buttons may show a circular depression at the base around the shank. Shanks inset into holes in the button is typical after World War I. Tinned Iron Back (TIB) and stamped brass turret back buttons are common from the 1880s to 1920s.
Sometimes one of the best indicators of button age is the manufacturers backmarks. Here are examples of the American manufacturer Scovill, and their 19th century backmarks as reported by Albert (1976):
LEVENWORTH, HAYDEN & SCOVILL (also as LH&S) 1811-1827
J.M.L. & W.H. SCOVILL 1827-1840
SCOVILLS : 1827-1840
SCOVILLS & CO. : 1840-1850
SCOVILL MANUFACTURING CO. : 1850-1960
SCOVILL Mg. Co.: 1850-1865
SCOVILL Mg. Co. / WATERBURY CT. 1850-1865
SCOVILL Mf'g Co. : WATERBURY CT. 1850-1865
SCOVILL Mf'g Co. WATERBURY : 1850-1865
SCOVILL Mfg Co. WATERBURY CT. : 1850-1865
Keep in mind that using Scovill backmark lettering (including dots and stars) is not a foolproof method because Scovill often used old backmark dies to make newer buttons. Thus it is possible to have a World War I "Great Seal" button with an 1850 backmark. Another nuance is that while text may remain the same, other embellishments on Scovill buttons change with time. An 1850 backmark may have the name in a groove or one or two rings made of fine lines or tiny dots, whereas a later button may have no ring of dots (like the Great Seal general service button below.
Here are Scovill examples we have observed:
SCOVILL MF'G CO. WATERBURY CT. 1872-1902 (on GI 98, ring of large dots)
SCOVILL MF'G CO. * WATERBURY *: 1902-est. 1918
(on Great Seal coat buttons with ring of large dots)
- Norberto UgaldeModerador
- Cantidad de envíos : 7393
Edad : 61
Localización : Querétaro, Querétaro. México
Fecha de inscripción : 20/12/2007
Puntos : 18375
Re: BOTONES MILITARES AMERICANOS U.S.A.
Jue 13 Jun 2013, 4:50 pm
Excelente información Compa Feliz Mil Gracias por compartirla!!! un + para ti.
Saludos
Saludos
Permisos de este foro:
No puedes responder a temas en este foro.